Keycard Doors

From EDukeWiki
Jump to: navigation, search
Build/Mapster32 Map Editing

Level Editing · True Room Over Room Mapping Guide · Build/Mapster32 Keyboard Commands
Special Tile Listing · Sector Effector Tag Listing · Sector Tag Listing
Utilities Reference Guide · Mapster32 Scripting · Mapster32 Map Checking

NOTE: Much of information on this page is from around 1999. Some may be outdated, and some may be incorrect -- this page exists to get you started with the Level Editing and may not currently cover some of the additional features available in Mapster32.

Making Locked Doors

Map Name: TUTORIAL.MAP (ROOM 1-I)

To make a locked door (that must be opened with a keycard) follow these steps:

STEP 1: Place an access pad sprite (#130 or #170) somewhere in your map. Give it a hitag value of 212. Give it a unique lotag value.
STEP 2: Place an ActivatorLocked sprite (#4) in the door sector. Give this sprite the same lotag value you gave the access pad.
STEP 3: Place a key sprite (#60) somewhere in your level.
STEP 4: Change the palette of *both* the key and the access pad (use [ALT]+[P] in 3D mode) to the following values to make one of the 3 different kinds of keys and locks:
  • 0 = Blue
  • 21 = Red
  • 23 = Yellow